Wood Coatings
Wood coatings are used to enhance aesthetic appeal and surface protection on the wooden surfaces of furniture, cabinets, sidings, and decking & floorings, among others. Wood coatings have extensive use in both residential and non-residential applications.
The development of new technologies in wood coating and the demand for low-VOC coatings are likely to create new growth opportunities.
WB (Waterbase) Coating
The product is designed to cater market that more concern to the environment and friendly used. This product also have good outdoor application whereby the coating and withstand weathering better compare to Solvent System.
Product Features:
~ Fast dry
~ Non toxic
~ Environment friendly
~ DIY products
~ German technology +Nanotech
~ Economical
~ Not affect by Solvent price
~ Better hardness compare to NC
Product List:
~ Polyurethane System
~ Acrylic System
~ Pigmented Primer Sealer
~ Pigmented Topcoat
~ White Primer for MDF and HDF, door skin
~ Wood Putty
Applications:
~ Spray, Brush, roller application
ST (Stone Finish) Coating
Stone finish is designed to cater the needs in decoration furniture industry and building industry for indoor and outdoor furnishing. This product is environment friendly and doesn’t harm to the nature.
Product features:
~ Non toxic
~ Environment friendly
~ Decoration added product
~ 5 years warranty for mould, fungus grow.
Product Lists:
~ Stone Sealer in Solvent base & water base
~ Stone finished white color
~ Stone Top coat in Solvent base & water base.
O”Gel Wiping Wood Stain
Is a type of pigmented stain that contains a very high pigment concentration. It is typically makes from iron oxide pigment with white spirit as major solvent. Owing to its high pigment content, O”Gel Wiping stain is not intended for use on bare wood and its usually applied onto a wash coat or sealer after sanding.
Product Lists:
~ Water base
~ Solvent base
NC (Nitrocellulose) Coating
Nitrocellulose-based coating is one pack coating system that dries solely by evaporation of solvent.It is more economical and user friendly that 2-pack coating system such as PU. Normally, nitrocellulose-based coating gives moderate performances, compared with 2-pack coating.
Product Features:
~ Economical
~ Fast dry
~ Good flow and leveling
Product List:
~ Clear Sanding Sealer
~ Gloss Clear Lacquer
~ Semi Gloss or Matt Clear Lacquer
~ Pigmented Sealer
~ Pigmented Gloss Lacquer
~ Pigmented Semi or Matt Lacquer
Applications:
~ Air drying Single Component System
~ Spray, Dip, Tumbling, Extruder, Brush or Electrostatic application
PC (Pre-Catalysed) Coating
The products was formulated to enhance physical properties of the coating which can provide good chemical resistance and higher film build. The product exhibit film quantity better than NC and slightly lower compare to AC.
Product Features:
~ Better chemical resistance
~ High solid
~ Hardness H - HB
~ Economical compare to AC/ PU
~ Prano finishing
Product List:
~ Clear Sanding Sealer
~ Gloss Clear Lacquer
~ Semi Gloss or Matt Clear Lacquer
~ Pigmented Sealer
~ Pigmented Gloss Lacquer
~ Pigmented Semi or Matt Lacquer
Applications:
~ Air drying Single Component System with Acid promoter
~ Spray, Dip, Tumbling, Extruder, Brush or Electrostatic application
1K Acrylic Coating
The product was formulated to enhance physical properties of the coating which can provide non yellowing properties compare to NC and AC products.
Product Features
~ Fast Dry
~ Acrylic Base
~ Non-Yellowing
~ Economical
Product List:
~ 1K Acrylic Sealer & Top Coat
~ 1K Acrylic White Sealer & White Top Matt & Gloss
Applications:
~ Air Drying Single Component System
~ Spray, Dip, Tumbling, Extruder, Brush or Electrostatic application
AC (AC-Catalysed) Coating
AC products are mineral acid catalysed system to achieve faster cure, higher solid and better build.
Product Features
~ Fast Drying
~ Good build
Product List:
~ Clear Sanding Sealer
~ Gloss Clear Lacquer (Full Gloss or water clear gloss)
~ Semi Gloss or Matt Clear Lacquer
~ Pigmented Sealer
~ Pigmented Gloss Lacquer
~ Pigmented Semi or Matt Lacquer
~ Self priming Lacquer
Applications:
~ Acid curing system with Acid Promoter
~ Spray, Brush or Electrostatic application
PU (Polyurethane) Coating
These are two-pack acrylic polyurethane coating designed for high quality timber furniture and wooden products. The product gives superior quality for the furniture by improving the physical and chemical properties of the coating.
Product Features
~ High Solid
~ Fast Drying
~ Good Solvent Resistance
~ Hardness H - 4H
Product List:
~ Clear Sanding Sealer
~ Gloss Clear Lacquer (High Gloss with Mirror effect)
~ Semi Gloss or Matt Clear Lacquer
~ Pigmented Sealer
~ Pigmented Gloss Lacquer
~ Pigmented Semi or Matt Lacquer
~ Self priming Lacquer
Applications:
~ Twp Components System with Cross Linking Agent
~ Spray, Brush or Electrostatic application
Chrome Effect Coatings
Chrome effect coatings are used on consumer products with high sparkle & brilliant silver effect look like aluminum & stainless steel are require in electronic and electric appliances.
Product Features
~ Fast Drying & user friendly
~ Chrome like effect
Road Marking Paint
Road Marking Paint is an alkyd and chlorinated rubber resin paint system for reflective road marking. It is recommended for marking roads and car parks. It is suitable for application by brush or roller.
Product Features
~ High Reflectivity
~ Good hiding Power
~ Good brush ability
~ Easy to use
Glass Protective Coating
The glass protective coating is used as a protective layer or mirror. It will prevent oxidation of coating exposed to moisture in the air that causes decoration of the functionality and appearance of the mirror. Further, the glass protective coating can be used as thin, transparent and translucent aesthetic color for glass.
Product Features
~ Medium Drying
~ Good adhesive on glass
~ To prevent oxidation
1K Urethane Wood-Coating
1K Urethane wood-coating is Solvent-based and suitable for garden furniture & floor parquet. It is available in Matt & Semi-gloss finishes.
Product Features
~ User friendly
~ Good weather resistance
~ Good mechanical & chemical resistance
Wood Glaze/ Wood Filler/ Wood Stain
Wood Glaze - is a type of pigment wiping stain that contains a very high pigment concentration. It is typically makes from iron oxide pigment with white spirit as major solvent. Owing to its high pigment content, glaze is not intended for use on bare wood and its usually applied onto a wash coat or sealer after sanding.
Wood Filler - is used in the furnishing process to fill wood pores and grain structure, thereby producing a smooth surface and to enhance natural beauty by accentuating the grain pattern. the inclusion of this operation is optional, depending on whether a close-pore or open-pore finish is desire.
Wood Stain - is an alcohol-based dye stain that appreciably reduces grains rising. It’s drying time ranges from 15 to 30 minutes depending on the type of application and drying facility available.
We have a wide range of products that can cater for your needs. With our best, brightest and quality surface coating, our existing customers continue to look toward for us as our products able to continually provide the satisfaction to them by enhance the value of their products.